{"title":"Cloak \u0026 Cape Bits","description":"\u003cp\u003eA cloak is what turns a static miniature into a figure caught mid-stride. It is also the part most kits leave out, because a flowing cape cannot be cast in one piece with the body it hangs from — which is exactly why cloaks and capes are sold separately, as bits.\u003c\/p\u003e\u003cp\u003eThis range covers torn and battle-damaged capes, fur-lined wolf cloaks, plain hooded cloaks, tabards and loincloths, printed in 14K resin and cured in our workshop in France.\u003c\/p\u003e\u003ch2\u003eFitment\u003c\/h2\u003e\u003cp\u003eSculpted for 32 mm heroic-scale infantry, with a flat contact surface at the shoulders and neck. Heavier pieces are also available at 40 mm. Our \u003ca href=\"\/blogs\/infos\/wargaming-bits-scale-guide-32mm-40mm-90mm\"\u003esize guide\u003c\/a\u003e explains how the three scales relate, and the \u003ca href=\"\/blogs\/infos\/how-to-add-cloaks-capes-32mm-miniatures\"\u003ecloak fitting guide\u003c\/a\u003e walks through the conversion step by step.\u003c\/p\u003e\u003ch2\u003eLooking for the files instead?\u003c\/h2\u003e\u003cp\u003eEvery product on this page is printed resin, shipped from France. Part of the range also exists as pre-supported STL files for instant download — those are listed separately in the \u003ca href=\"\/collections\/digital-products\"\u003edigital collection\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eOriginal designs inspired by grimdark sci-fi and dark fantasy aesthetics, not affiliated with or endorsed by any official brand.\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"set-1-5-viking-wolf-cloaks-fur-covered-capes-with-tribal-details-32mm-kitbash-bits","title":"Viking Wolf Cloaks Set 1 of 2 – Fur-Covered Capes | 32mm Resin","description":"\u003cp\u003eSet 1 opens a 2-set Viking wolf cloak range: fur-covered capes with tribal details.\u003c\/p\u003e\u003cp\u003e5 resin pieces, 32mm scale. Printed in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56004132110720,"sku":"SW0046","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/SW_Cloaks_SET1.png?v=1748042331"},{"product_id":"set-1-5-simple-cloaks-plain-warrior-capes-bits-ultra-hd-14-k-412144032","title":"Simple Cloaks – 5 Plain Capes | 32mm Resin Bits","description":"\u003cp\u003e5 plain capes with a clean, simple silhouette, printed and ready to glue, no printer needed.\u003c\/p\u003e\u003cp\u003e5 resin pieces, 32mm heroic scale.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eOwn a resin printer? Grab the STL file and print it yourself, link to be added once matching is validated.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56414912381312,"sku":"G0041","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/9afe1912-b84b-4fc3-8abd-76a510bd0d44-copy.jpg?v=1755554776"},{"product_id":"5-tattered-cloaks-worn-warrior-capes-bits-ultra-hd-14-k-412144024","title":"Battle-Damaged Cloaks – 5 Torn \u0026 Worn Capes | 32mm Resin Bits","description":"\u003cp\u003e5 torn and worn capes for veteran-looking infantry, printed and ready to glue, no printer needed.\u003c\/p\u003e\u003cp\u003e5 resin pieces, 32mm heroic scale.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eOwn a resin printer? Grab the STL file and print it yourself, link to be added once matching is validated.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56414915887488,"sku":"G0042","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/1dd12219-afc3-4cde-b93f-ecdfa7db37b1-copy.jpg?v=1755554883"},{"product_id":"5-ornamented-cloaks-detailed-warrior-capes-with-chains-ropes-ultra-hd-14-k-412144028","title":"5 Ornamented Cloaks – Warrior Capes With Chains \u0026 Ropes | Resin","description":"\u003cp\u003e5 warrior capes ornamented with chains and ropes, generic enough to fit most 32mm infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56414916903296,"sku":"G0043","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/fd37280e-a9c0-4770-b803-526ce1591d65-copy.jpg?v=1755554948"},{"product_id":"set-2-5-emberforge-cloaks-for-fire-lizard-dragon-scale-stone-plate-charred-edge-capes-413388773","title":"Fire Lizard Cloaks Set 2 of 2 – Dragon-Scale Capes | Emberforge 32mm Resin Bits","description":"\u003cp\u003eSet 2 completes the dragon-scale, stone-plate and charred-edge cape range, printed and ready to glue, no printer needed.\u003c\/p\u003e\u003cp\u003e5 resin pieces, 32mm scale.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eOwn a resin printer? Grab the STL file and print it yourself, link to be added once matching is validated.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56531269550464,"sku":"FL0012","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/bac4bbe6-2a2a-43f0-bd84-d78547d0ed26-copy.jpg?v=1757421081"},{"product_id":"set-1-5-emberforge-cloaks-for-fire-lizard-dragon-scale-stone-plate-charred-edge-capes-413388772","title":"Fire Lizard Cloaks Set 1 of 2 – Dragon-Scale Capes | Emberforge 32mm Resin Bits","description":"\u003cp\u003eSet 1 opens a 2-set range of dragon-scale, stone-plate and charred-edge capes, printed and ready to glue, no printer needed.\u003c\/p\u003e\u003cp\u003e5 resin pieces, 32mm scale.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eOwn a resin printer? Grab the STL file and print it yourself, link to be added once matching is validated.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56531272335744,"sku":"FL0011","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/1810360f-5e88-499e-a194-cb1bf522e8ab-copy.jpg?v=1757421122"},{"product_id":"8-heavy-guard-loincloths-ember-forge-for-fire-lizard-gothic-chains-keys-fangs-stone-riveted-plates-413388750","title":"Fire Lizard Loincloths – 8-Piece Gothic Chains | Ember Forge Resin","description":"\u003cp\u003e8 loincloths for the Fire Lizard Ember Forge range: gothic chains, keys, fangs, stone and riveted plates, a bigger assortment than the 5-piece Greytide set.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56531311526272,"sku":"FL0028","price":8.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/778948bd-4d0c-4e4e-9e8f-5ccb236b5c25-copy.jpg?v=1757422083"},{"product_id":"set-3-5-greytide-cloaks-for-fire-lizard-dragon-scale-stone-plate-charred-edge-capes-413535730","title":"Fire Lizard Cloaks Set 3 of 2+1 – Dragon-Scale Capes | Greytide Resin","description":"\u003cp\u003eSet 3 extends the dragon-scale cloak range beyond Sets 1-2.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56543274828160,"sku":"FL0064","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/c54b49ae-f0bf-4afd-a1f4-bfef78aae898-copy.jpg?v=1757610491"},{"product_id":"5-loincloths-greytide-for-fire-lizard-dragon-skull-and-skin-fangs-stone-riveted-plates-413535715","title":"Fire Lizard Loincloths – 5-Piece Dragon-Skull | Greytide Resin","description":"\u003cp\u003e5 loincloths for the Fire Lizard Greytide range: dragon skull and skin, fangs, stone and riveted plates.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56543281316224,"sku":"FL0075","price":8.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/dc34e88f-670a-4116-a270-2cb9b6a43cb9-copy.jpg?v=1757610976"},{"product_id":"set-5-classic-cloak-for-marines-bits-for-ultra-hd-14-k-418963647","title":"Classic Cloak for Marines Set 5 | Resin","description":"\u003cp\u003eSet 5 completes the classic cloak range for marine-scale infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56703446090112,"sku":"G0067","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/95c39c16-d3ae-4ba9-b0fc-44f7dd822a5d-copy.jpg?v=1760628543"},{"product_id":"set-4-classic-cloak-for-marines-ultra-hd-14-k-418963646","title":"Classic Cloak for Marines Set 4 | Resin","description":"\u003cp\u003eSet 4 of a classic cloak style for marine-scale infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56703449530752,"sku":"G0066","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/52d72764-76fe-4b9c-a61c-44c68a0f6805-copy.jpg?v=1760628622"},{"product_id":"set-1-black-crusader-cloak-with-cross-and-chains-bits-ultra-hd-14-k-418963644","title":"Black Crusader Loincloth With Cross \u0026 Chains | 32mm Resin","description":"\u003cp\u003eA loincloth with a cross and hanging chains, a devotional touch for Black Crusader infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":56703451005312,"sku":"BT0073","price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/Loinclothblackcrusader.png?v=1771908731"},{"product_id":"black-crusader-axes-chains-set-1-2-greytide","title":"Black Crusader Axes With Chains Set 1 of 2 – Greytide | 32mm Resin","description":"\u003cp\u003eSet 1 opens a 2-set range of axes with hanging chains for Black Crusader infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Left","offer_id":56835374514560,"sku":"BT0044","price":9.0,"currency_code":"EUR","in_stock":true},{"title":"Right","offer_id":56835374547328,"sku":"BT0137","price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/AXEBTGREYTIDE.png?v=1762456774"},{"product_id":"set-1-black-crusader-cloak-with-cross-and-chains-bits-ultra-hd-14k","title":"Shadowguard Axes With Ornaments Set 1 of 2 | Greytide Resin","description":"\u003cp\u003eSet 1 opens a 2-set range of ornamented axes for the Shadowguard Greytide line.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Left","offer_id":56835376185728,"sku":"DA0005","price":9.0,"currency_code":"EUR","in_stock":true},{"title":"Right","offer_id":56835376218496,"sku":"DA0100","price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/AXEDAGREYTIDESET1.png?v=1762457100"},{"product_id":"claw-greytide-black-crusader-bits-ultra-hd-14k","title":"Generic Cloak Set 1 of 2 | Greytide Resin","description":"\u003cp\u003eSet 1 opens a 2-set generic cloak range, Greytide range.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57093528387968,"sku":"G0088","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/CLOAKGENERICGREYTIDESET1.png?v=1767112021"},{"product_id":"set-1-cloak-greytide-generic-bits-ultra-hd-14k","title":"Generic Cloak Set 2 of 2 | Greytide Resin","description":"\u003cp\u003eSet 2 completes the generic cloak range, Greytide range.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57094714196352,"sku":"G0089","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/CLOAKGENERICGREYTIDESET2.png?v=1767112253"},{"product_id":"black-crusader-loincloth-set-1-3-greytide","title":"Black Crusader Loincloth Set 1 of 3 – Greytide | 32mm Resin","description":"\u003cp\u003eSet 1 opens a 3-set loincloth range for Black Crusader infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57110370058624,"sku":"BT0057","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/LOINCLOTHBTGREYTIDESET1.png?v=1767389811"},{"product_id":"black-crusader-loincloth-set-2-3-greytide","title":"Black Crusader Loincloth Set 2 of 3 – Greytide | 32mm Resin","description":"\u003cp\u003eSet 2 continues the loincloth range for Black Crusader infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57110378545536,"sku":"BT0058","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/LOINCLOTHBTGREYTIDESET2.png?v=1767389948"},{"product_id":"set-3-loincloth-greytide-black-crusader-bits-ultra-hd-14k","title":"Black Crusader Loincloth Set 3 of 3 – Greytide | 32mm Resin","description":"\u003cp\u003eSet 3 completes the loincloth range: own all three sets for a squad with no two loincloths alike.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57110435103104,"sku":"BT0059","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/LOINCLOTHBTGREYTIDESET2.png?v=1767389948"},{"product_id":"angel-death-loincloth","title":"Angel of the Death Loincloth | Greytide Resin","description":"\u003cp\u003eA loincloth for the Angel of the Death Greytide range.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57110441623936,"sku":"DA0023","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/LOINCLOTHDAGREYTIDE.png?v=1767390812"},{"product_id":"roman-loincloth","title":"Roman Loincloth | Greytide Resin","description":"\u003cp\u003eA Roman-style loincloth for kitbashing, Greytide range.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57110458040704,"sku":"G0093","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/LOINCLOTHROMANGENERICGREYTIDE.png?v=1767391449"},{"product_id":"black-crusader-mauls-set-1-2-greytide","title":"Black Crusader Mauls Set 1 of 2 – Greytide | 32mm Resin","description":"\u003cp\u003eSet 1 opens a 2-set maul range for Black Crusader infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Left","offer_id":57287306477952,"sku":"BT0060","price":9.0,"currency_code":"EUR","in_stock":true},{"title":"Right","offer_id":57287306510720,"sku":"BT0154","price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/MAULSBTGREYTIDESET1.png?v=1769153386"},{"product_id":"black-crusader-cloak-cross-chains","title":"Black Crusader Cloak With Cross \u0026 Chains | 32mm Resin","description":"\u003cp\u003eA cloak with a cross and hanging chains, a devotional touch for Black Crusader infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePrinting your own army? Grab the \u003ca href=\"https:\/\/sharkass3d.com\/products\/crusader-cloak-set-5-knightly-capes-heroic-32mm-scale-supported\"\u003eCrusader Cloaks – 5 Knightly Capes\u003c\/a\u003e digital file and scale production to your needs.\u003c\/em\u003e\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57465947324800,"sku":"BT0043","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/il_fullxfull.7530324197_re2v.avif?v=1771926821"},{"product_id":"eternal-pilgrim-heavy-guard-arms","title":"Eternal Pilgrim Heavy Guard Arms | Greytide Resin","description":"\u003cp\u003eArms sized for heavy guard-scale Eternal Pilgrim infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, heavy guard scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Left","offer_id":57544967389568,"sku":"EP0006","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"Right","offer_id":57544967422336,"sku":"EP0007","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/ArmsTermiBTDAGreytide.png?v=1772878127"},{"product_id":"eternal-pilgrim-heavy-guard-cloak-set-1-2","title":"Eternal Pilgrim Heavy Guard Cloak Set 1 of 2 | Greytide Resin","description":"\u003cp\u003eSet 1 opens a 2-set heavy guard-scale cloak range for Eternal Pilgrim infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, heavy guard scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57545004220800,"sku":"EP0014","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/Cloak_Termi_BT_DA_Greytide_Set_1.png?v=1772879493"},{"product_id":"eternal-pilgrim-heavy-guard-cloak-set-2-2","title":"Eternal Pilgrim Heavy Guard Cloak Set 2 of 2 | Greytide Resin","description":"\u003cp\u003eSet 2 completes the heavy guard-scale cloak range, pair it with Set 1 for squad variety.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, heavy guard scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57545036136832,"sku":"EP0015","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/Cloak_Termi_BT_DA_Greytide_Set_2.png?v=1772879809"},{"product_id":"eternal-pilgrim-heavy-guard-fist-set-2-2","title":"Eternal Pilgrim Heavy Guard Fist Set 2 of 2 | Greytide Resin","description":"\u003cp\u003eSet 2 completes the heavy guard-scale fist range, pair it with Set 1 for squad variety.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, heavy guard scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Left","offer_id":57545060811136,"sku":"EP0016","price":9.0,"currency_code":"EUR","in_stock":true},{"title":"Right","offer_id":57545060843904,"sku":"EP0017","price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/Fist_Termi_BT_DA_Greytide_Set2_1.png?v=1772881009"},{"product_id":"eternal-pilgrim-heavy-guard-loincloth","title":"Eternal Pilgrim Heavy Guard Loincloth | Greytide Resin","description":"\u003cp\u003eA loincloth sized for heavy guard-scale Eternal Pilgrim heavy infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, heavy guard scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":57568415777152,"sku":"EP0039","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/Loincloth_Termi_BT_DA_Greytide.png?v=1773088248"},{"product_id":"eternal-pilgrim-heavy-guard-mauls","title":"Eternal Pilgrim Heavy Guard Mauls | Greytide Resin","description":"\u003cp\u003eMauls sized for heavy guard-scale Eternal Pilgrim heavy infantry, a heavy melee option.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, heavy guard scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Left","offer_id":57568456081792,"sku":"EP0040","price":9.0,"currency_code":"EUR","in_stock":true},{"title":"Right","offer_id":57568456114560,"sku":"EP0041","price":9.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/Mauls_Termi_BT_DA_Greytide.png?v=1773088401"},{"product_id":"cloak-heavy-guard-eternal-crusader-greytide-bits-ultra-hd-14-k-430912342","title":"Eternal Crusader Heavy Guard Cloak | Greytide Resin","description":"\u003cp\u003eA cloak sized for heavy guard-scale Eternal Crusader heavy infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, heavy guard scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":58214685966720,"sku":"BT0101","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/61a8dbfc-9991-42ca-a375-8961a89893e2-copy.jpg?v=1780689688"},{"product_id":"loincloth-heavy-guard-eternal-crusader-greytide-bits-ultra-hd-14-k-430912355","title":"Eternal Crusader Heavy Guard Loincloth | Greytide Resin","description":"\u003cp\u003eA loincloth sized for heavy guard-scale Eternal Crusader heavy infantry.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, heavy guard scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":58214686130560,"sku":"BT0106","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/fd5f549a-ccc4-417b-92ed-17ec8dc338ca-copy.jpg?v=1780689688"},{"product_id":"loincloth-set-1-primal-hound-greytide-bits-ultra-hd-14-k-429817063","title":"Primal Hound Loincloth Set 1 – Beast-Warrior Bits | 32mm Resin","description":"\u003cp\u003eA loincloth for Primal Hound Greytide infantry, beast-warrior detailing.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":58214690062720,"sku":"PH0020","price":5.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/9b3f8af2-af47-4971-b110-bc1a461bb1f3-copy.jpg?v=1780689688"},{"product_id":"cloak-heavy-guard-primal-hound-greytide-bits-ultra-hd-14-k-429817096","title":"Primal Hound Heavy Guard Cloak – Beast-Warrior Bits | 32mm Resin","description":"\u003cp\u003eA heavy guard-scale cloak for Primal Hound Greytide heavy infantry, sized to match bulkier armor.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, heavy guard scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":58214690095488,"sku":"PH0021","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/fb550f10-5dad-4c1c-b250-560b511dee4e-copy.jpg?v=1780689688"},{"product_id":"bundle-loincloth-primal-hound-greytide-bits-ultra-hd-14-k-429817091","title":"Primal Hound Loincloth Bundle – Beast-Warrior Bits | 32mm Resin","description":"\u003cp\u003eA bundle of loincloths for the Primal Hound Greytide range, several beast-warrior variants in one pack.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"1","offer_id":58214692848000,"sku":"PH0040","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"2","offer_id":58214692880768,"sku":"PH0041","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"3","offer_id":58214692913536,"sku":"PH0042","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"4","offer_id":58214692946304,"sku":"PH0043","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"5","offer_id":58214692979072,"sku":"PH0044","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"6","offer_id":58214693011840,"sku":"SW0099","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"7","offer_id":58214693044608,"sku":"SW0099","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"8","offer_id":58214693077376,"sku":"SW0099","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"9","offer_id":58214693110144,"sku":"SW0099","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"10","offer_id":58214693142912,"sku":"SW0099","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"11","offer_id":58214693175680,"sku":"SW0099","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"12","offer_id":58214693208448,"sku":"SW0099","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"13","offer_id":58214693241216,"sku":"SW0099","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"14","offer_id":58214693273984,"sku":"SW0099","price":1.0,"currency_code":"EUR","in_stock":true},{"title":"15","offer_id":58214693306752,"sku":"SW0099","price":1.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/aecd6991-368c-4a7c-9735-0ee06c145f5d-copy.jpg?v=1780689689"},{"product_id":"cloak-set-1-primal-hound-greytide-14-k-ultra-hd-bits-429817094","title":"Primal Hound Cloak Set 1 – Beast-Warrior Bits | 32mm Resin","description":"\u003cp\u003eA cloak for Primal Hound Greytide infantry, fur-trimmed beast-warrior silhouette.\u003c\/p\u003e\u003cp\u003ePrinted in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships, 32mm scale. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.\u003c\/p\u003e\u003cp\u003eGot a custom conversion in mind? Message us, Sharkass3D prints one-offs too.\u003c\/p\u003e","brand":"Sharkass","offers":[{"title":"Default Title","offer_id":58214694453632,"sku":"PH0057","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/5646\/2464\/files\/afc2883a-e641-4cba-a90c-4926aaf2d61b-copy.jpg?v=1780689690"}],"url":"https:\/\/sharkass3d.com\/collections\/cloak-and-cape-bits.oembed","provider":"Sharkass","version":"1.0","type":"link"}