Cart (0)
Your cart is empty
5 rocky base toppers to finish a 32mm-scale Fire Lizard squad's bases: cracked stone and rubble ground texture, printed and ready to glue, no printer needed.
5 resin pieces.
Printed in Ultra-HD 14K resin with crisp, high-detail layer lines and checked before it ships. Some pieces travel with their printing supports still attached, soak them in warm water for about a minute and they lift off clean.
Printing your own army? Grab the Fire Lizard Rocky Base Toppers – 32mm digital file and scale production to your needs.
Got a custom conversion in mind? Message us, Sharkass3D prints one-offs too.
Officially licensed sculpts
Pre-washed & cured - paint-ready
Fits 32 mm heroic - scale kits
Printed to order · ships in 3–7 days
What's in the box
You'll receive the resin parts shown in the product images and listed in the title and description. The piece count is in the title (e.g. "×10" = ten pieces). Everything is printed to order, supplied unpainted and unassembled, washed and cured, ready for primer. Most parts ship support-free; a few delicate pieces keep their supports for protection — see Prep & assembly.
Prep & assembly
Every part is washed and UV-cured before it ships, so it's ready for primer straight away. If a piece still has supports attached, soak it in hot water for about a minute and they peel off cleanly. Glue with cyanoacrylate (superglue) — a thin layer, a few seconds of pressure. Pin heavier parts like weapon arms, backpacks or large plates with a short length of brass rod so the joint survives handling and games.
Scale & compatibility
Sculpted true-scale for 32 mm heroic sci-fi wargaming — the same proportions as current plastic kits. Slots, tabs and ball-joints are sized to match standard kits, so parts swap in with minimal trimming. Recommended base sizes and specific kit compatibility are noted in the product description where it matters.
Shipping & returns
Printed to order: we cast, cure and pack within 3–7 working days, then ship with tracking. Delivery time after dispatch depends on your country. Orders leave from France — no customs for EU buyers; import fees may apply elsewhere.
Faulty or damaged on arrival? Send a photo within 14 days and we'll reprint and reship at no cost. For change-of-mind returns, see our Refund policy.
Optional at checkout (VIP Delivery) : parcel protection against loss, theft or breakage in transit.
Is this official?
No. Sharkass is not affiliated with, licensed by or endorsed by Games Workshop. Our parts are original designs or licensed from independent 3D sculptors, produced by us in France, and built to be compatible with 32 mm heroic-scale wargames.
Licensed sculpts
Ultra-HD 14K resin
32 mm true-scale
Dispatch 3–7 days
Secure checkout
SSL encryption for secure payments
Made in France
Sculpted, printed and cured in our Grenoble workshop
Dispatch 3–7 days
Printed to order, then shipped with tracking
Ships worldwide
Ships from France — no customs for EU orders
Inside the Sharkass Forge
Grenoble, France — every part printed, cured and checked by hand.
Sculpted & licensed
Every design is created in-house or licensed from independent 3D sculptors. Original work — never recasts.
Printed & hand-cured
We print each part to order on an Ultra-HD 14K resin printer, then wash it, UV-cure it and check it by hand before it's packed.
Made to order, shipped in 3–7 days
Nothing sits in a warehouse. Your parts are printed for your order and dispatched within 3–7 working days, with tracking.
What you're actually paying for
|
Standard resin bits |
|
Resolution |
Ultra-HD 14K resin — detail holds up under primer and drybrush |
4K, 8K or FDM — layer lines often show through paint |
|
Prep work |
Washed, UV-cured and de-supported — paint-ready |
Raw print — you wash, cure and clean it up. |
|
Fit |
Sculpted true-scale for 32 mm heroic kits |
Rescaled to fit — proportions vary |
|
Sculpts |
Original and licensed designs |
Frequently recast or grey-market |
|
If a part fails |
Misprint or shipping damage? We reprint it, no questions. |
Case-by-case, if at all |
Will I receive a physical item if I buy a digital product?
No. Products marked with [STL] or [DIGITAL] are strictly 3D downloadable files for home printing. No physical product will be shipped. Please check your cart carefully before checking out.
How long does it take to dispatch my order?
We operate a print-on-demand forge in Europe. Production typically takes 3 to 7 business days before your order is dispatched, ensuring every piece meets our quality standards.
Are the miniatures assembled and painted?
All physical relics are supplied unpainted and unassembled. They are printed in grey resin.
Do I need to clean or cure the parts before painting?
No. Every piece is meticulously washed, UV-cured, and has its supports manually removed in our workshop. They are ready to be primed, though a quick rinse in warm soapy water is always good practice for resin.
What glue should I use?
Plastic glue (plastic cement) will not work on resin. You must use super glue (cyanoacrylate) to assemble these bitz.
What scale are these bitz designed for?
Our designs are scaled for 32mm heroic sci-fi wargaming, making them perfectly compatible with modern prime-scale crusaders.
Will I see print lines on the models?
Layer stepping sits below what primer fills — on a painted, based model you won't see it.
Do you ship internationally?
Yes, we deploy relics worldwide with tracked shipping. If your country isn't listed among the destinations, send us an email so we can add it and ship our relics directly to your home!
Is this official Games Workshop?
No. Sharkass is not affiliated with, licensed by or endorsed by Games Workshop. Our parts are original designs or licensed from independent 3D sculptors, produced by us in France and built to be compatible with 32 mm heroic-scale wargames.
